Use the following diagram for the applique.

7

10

13

15

17

19

25

25

5

12

9

5

The first step, which is sewing the batting down and trimming it, is optional. It is so no batting is in the seam, making the blocks easier to join. If you prefer the batting in the seam just skip STEP 1 and proceed straight to STEP 2.

Place batting 1 on top of the hoop.

 

 

STEP 1 Stitch the batting down.

 

 

Remove the hoop from your machine and trim the batting about 1-2mm from the stitching.

 

 

Place fabric A right side up on top of the hoop.

 

 

 

STEP 2 Stitch the fabric down.

STEP 3 Stitch the quilting in the background

 

 

STEP 4 Embroider the large stem.

 

 

STEP 5 Stitch the placement lines for pieces 5. (These are the insides of two of the flowers on the diagram).

 

 

 

Cut a piece of fabric large enough to cover the placement lines and place it right side up on top of the hoop covering the placement lines completely. Note, if your background fabric shows through, you can always double your applique fabric.

 

 

STEP 6 Stitch the fabric down.

 

 

Remove the hoop and trim the fabric as close to the stitching as you can without cutting the stitching (use applique scissors if you have them.)

 

 

STEP 7 & 8 Repeat the applique process for piece 7.

 

 

 

STEP 9 Embroider the stamen ( no.9 ).

 

 

STEP 10 & 11 Repeat the applique process for piece 10.

 

 

STEP 12 Embroider the stamen ( no.12 ).

 

 

STEP 13 & 14 Repeat the applique process for piece 13.

 

STEPS 15 & 16 Repeat the applique process for piece 15.

STEPS 17 & 18 Repeat the applique process for piece 17.

 

 

STEPS 19 & 20 Repeat the applique process for piece 19.

 

 

STEP 21 Embroider the satin stitch around pieces 5.

 

STEP 22 Embroider the satin stitch around pieces 7, 10 and 13.

 

 

STEP 23 Embroider the stems connecting the flowers to the main stem.

STEP 24 Embroider the satin stitch around pieces 15, 17 and 19.

 

 

STEP 25 & 26 Repeat the applique process for pieces 25 (The top flower buds).

 

 

 

STEP 27 Embroider the satin stitch around pieces 25.

 

 

Remove your work from the hoop.

 

 

Trim the batting out of the seams if you skipped STEP 1.

 

Trim the seam to about ½ an inch.

Hold aside until all the blocks are made.

Tulip panel

Ausreiß bares Stickvlies in den Stickrahmen einspannen. Hoop cutaway stabiliser in the 5x7, 6x10 or 8x12.

 

Load the design.

The first step, which is sewing the batting down and trimming it, is optional. It is so no batting is in the seam, making the blocks easier to join. If you prefer the batting in the seam just skip STEP 1 and proceed straight to STEP 2.

Place batting 1 on top of the hoop.

 

STEP 1 Stitch the batting down.

 

 

Remove the hoop from your machine and trim the batting about 1-2mm from the stitching.

 

 

Place fabric A right side up on top of the hoop.

 

 

STEP 2 Stitch the fabric down.

STEP 3 Stitch the quilting in the background

 

STEP 4 Embroider the large stem

 

 

STEP 5 Stitch the placement line for the back petal

 

 

Cut a piece of fabric large enough to cover the placement line and place it right side up on top of the hoop covering the placement line completely.

 

 

STEP 6 Stitch the fabric down.

 

 

 

Remove the hoop and trim the fabric as close to the stitching as you can without cutting the stitching (use applique scissors if you have them).

 

 

STEP 7 & 8 Repeat the applique process for the two small side petals (Use a piece of fabric large enough to fabric enough to cover placement lines).

 

 

STEP 9 & 10 Repeat applique process for the middle petal using Fabric B.

 

 

STEP 11 & 12 Repeat applique process for the large side petals using Fabric C.

 

 

STEP 13 Embroider the satin stitch around the back petal.

 

 

STEP 14 Embroider the satin stitch around the two small side petals.

 

 

STEP 15 Embroider the satin stitch around the middle petal.

 

 

STEP 16 Embroider the petal detailing on the two large side petals.

 

 

 

STEP 17 Embroider the satin stitch around the two large side petals.

 

STEP 18 & 19 Repeat the applique process for the leaf, using fabric D. Leave the excess fabric in the seams (bottom of leaf).

 

 

STEP 20 Embroider the quilting on the leaf.

 

STEP 21 Embroider the satin stitch around the leaf.

 

 

Remove your work from the hoop.

 

 

Trim the batting out of the seams if you skipped STEP 1.

 

Trim the seam to about ½ an inch.

 

⇐ Предыдущая12345Следующая ⇒

Поделиться: