Hold aside until all the blocks are made. Ausreiß bares Stickvlies in den Stickrahmen einspannen

Daffodil panel

Ausreiß bares Stickvlies in den Stickrahmen einspannen. Hoop cutaway stabiliser in the 5x7, 6x10 or 8x12.

 

Load the design.

The first step, which is sewing the batting down and trimming it, is optional. It is so no batting is in the seam, making the blocks easier to join. If you prefer the batting in the seam just skip STEP 1 and proceed straight to STEP 2.

Place batting 1 on top of the hoop.

STEP 1 Stitch the batting down.

 

 

Remove the hoop from your machine and trim the batting about 1-2mm from the stitching.

 

 

Place fabric A right side up on top of the hoop.

 

 

STEP 2 Stitch the fabric down.

STEP 3 Stitch the quilting in the background

 

 

STEP 4 Embroider the large stem

 

 

STEP 5 Embroider the spathe on the stem.

 

STEP 6 Stitch the placement line for the petals.

 

 

Place Fabric E right side up on top of the hoop covering the placement line completely.

 

STEP 7 Stitch the fabric down.

 

 

Remove the hoop and trim the fabric as close to the stitching as you can without cutting the stitching (use applique scissors if you have them.)

 

 

STEP 8 & 9 Repeat the applique process for the corona, using Fabric F.

 

 

STEP 10 & 11 Repeat the applique process for the top of the corona, using Fabric G.

 

 

STEP 12 Embroider the quilting and satin stitch for the petals.

 

 

STEP 13 Embroider the quilting and satin stitch for the corona.

 

STEP 14 Embroider satin stitch around the top of the corona.

 

STEP 15 Embroider satin stitch inside the top of the corona.

 

 

Remove your work from the hoop.

 

 

Trim the batting out of the seams if you skipped STEP 1.

 

Trim the seam to about ½ an inch.

Hold aside until all the blocks are made.

Cherry Blossom panel

Ausreiß bares Stickvlies in den Stickrahmen einspannen. Hoop cutaway stabiliser in the 5x7, 6x10 or 8x12.

 

Load the design.

The first step, which is sewing the batting down and trimming it, is optional. It is so no batting is in the seam, making the blocks easier to join. If you prefer the batting in the seam just skip STEP 1 and proceed straight to STEP 2.

Place batting 1 on top of the hoop.

 

 

STEP 1 Stitch the batting down.

 

 

Remove the hoop from your machine and trim the batting about 1-2mm from the stitching.

 

 

Place fabric A right side up on top of the hoop.

 

 

 

STEP 2 Stitch the fabric down.        

STEP 3 Stitch the quilting in the background

 

STEP 4 Embroider the branches in the background

 

 

STEP 5 Embroider the bottom of the top flower.

 

 

 

STEP 6 Stitch the placement line for the flower at the bottom

 

 

Place Fabric H right side up on top of the hoop covering the placement line completely.

 

 

STEP 7 Stitch the fabric down.

 

Remove the hoop and trim the fabric as close to the stitching as you can without cutting the stitching (use applique scissors if you have them.)

 

 

STEP 8 & 9 Repeat the applique process for the flower at the top, using fabric I.

 

 

STEP 10 & 11 Repeat the applique process for the middle flower, using fabric J.

 

 

STEP 12 & 13 Repeat the applique process for the bud, using a piece of fabric large enough to cover the placement line.

 

 

STEP 14 Embroider the satin stitch around all the petals and the bud.

 

 

STEP 15 Embroider the stamens for the top flower.

 

 

STEP 16 Embroider the inside of the top flower.

 

 

STEP 17 Embroider the bottom section of the bud, as well as the insides of the middle and bottom flowers.

 

 

STEP 18 Embroider the stamens for the middle flower.

 

 

 

STEP 19 Embroider the stamens for the bottom flower.

 

 

Remove your work from the hoop.

 

 

Trim the batting out of the seams if you skipped STEP 1.

 

Trim the seam to about ½ an inch.

 

⇐ Предыдущая12345Следующая ⇒

Поделиться: