Архитектура Аудит Военная наука Иностранные языки Медицина Металлургия Метрология
Образование Политология Производство Психология Стандартизация Технологии


Hold aside until all the blocks are made.



Pansy panel

Ausreiß bares Stickvlies in den Stickrahmen einspannen. Hoop cutaway stabiliser in the 5x7, 6x10 or 8x12.

 

Load the design.

The first step, which is sewing the batting down and trimming it, is optional. It is so no batting is in the seam, making the blocks easier to join. If you prefer the batting in the seam just skip STEP 1 and proceed straight to STEP 2.

Place batting 1 on top of the hoop.

 

STEP 1 Stitch the batting down.

 

 

Remove the hoop from your machine and trim the batting about 1-2mm from the stitching.

 

 

Place fabric A right side up on top of the hoop.

 

 

STEP 2 Stitch the fabric down.

STEP 3 Stitch the quilting in the background

 

 

STEP 4 Stitch the placement line for leaves.

 

 

Place Fabric K right side up on top of the hoop covering the placement line completely.

 

 

STEP 5 Stitch the fabric down.

 

 

Remove the hoop and trim the fabric as close to the stitching as you can without cutting the stitching (use applique scissors if you have them.)

 

 

STEP 6 & 7 Repeat the applique process for the back petals, using Fabric L.

 

 

STEP 8 & 9 Repeat the applique process for the middle petals, using fabric M.

 

STEP 10 & 11 Repeat the applique process for the front petals, using fabric N.

 

STEP 12 & 13 Repeat the applique process for the detail petals in the centre, using fabric O.

 

 

 

STEP 14 Embroider the satin stitch around the leaves.

 

STEP 15 Embroider the satin stitch around the back petals.

 

STEP 16 Embroider the satin stitch around the detail petals in the centre.

 

 

STEP 17 Embroider the satin stitch around the middle petals.

 

 

 

STEP 18 Embroider the outer section of the centre of the flower

 

 

STEP 19 Embroider the inner section of the centre of the flower

 

STEP 20 Embroider the satin stitch around the bottom petals

 

 

Remove your work from the hoop.

 

 

Trim the batting out of the seams if you skipped STEP 1.

 

 

Trim the seam to about ½ an inch.

 

Hold aside until all the blocks are made.

 

 

Join all the panels.

 


Lay out your table runner in the order you would like it with the long side of the panels together.

 

Then place the first two panels right sides together. Pin and sew a half inch seam, sewing just inside the border lines already on the panels.

 

 

 

Open the seams and iron them flat.

 

 

Then continue joining the other panels in the same fashion.

 

 

 

Add the end borders.

 

Cut fabric P and batting 2.

 

 


Place fabric P on top of batting 2 right side up.

 

Then place one end of the runner on top of fabric P and batting 2 wrong side up. Have the excess of both batting 2 and fabric P towards the centre of the table runner.

 

Pin in place and stitch with a half inch seam. Stitch inside the border line on the runner so this line of sewing does not show on the front of the runner.

 

 

Repeat on the other end of the runner.

 


Fold over and iron the borders down neatly and cut away excess edges.

 


Topstitch for a neat flat finish.

Add the side borders.

Add the side borders in the same way using Fabric Q and batting 3.

 

 

Cut the backing

 


Place Fabric R (backing) on your table. Right side facing up.

 

Place your sewn runner on top of Fabric R. Right sides together.

 

 

Pin together lightly and trim the backing so it matches the shape of your runner. 

 


With the front and back of your runner still right sides together. Pin together more securely and make sure you leave an opening of about 15cm (6 inches) for turning.



Stitch the seam remembering to leave the opening.


 

Clip the corners for more pointed ones when turned. (Making sure you do not cut the stitching).

 

 

 

Then turn the right way out through the opening. Use a chopstick to help push out the corners

 

Iron.

 

 

 

Hand stitch (or use fabric glue) the opening closed.

 

 

Stitch in the ditch of the seams to attach the backing. (Use the same colour bobbin as your backing).

 


You have now finished your Spring Flowers table runner!

 

Enjoy!!

 


Поделиться:



Последнее изменение этой страницы: 2019-05-04; Просмотров: 286; Нарушение авторского права страницы


lektsia.com 2007 - 2024 год. Все материалы представленные на сайте исключительно с целью ознакомления читателями и не преследуют коммерческих целей или нарушение авторских прав! (0.024 с.)
Главная | Случайная страница | Обратная связь